It’s a common question: “Are there any BIOS settings Dell recommends for VMware ESX/vSphere?” Primarily, Dell recommends reading and following VMware’s best practices. The latest revision (as of this posting) can be found in their article “Performance Best Practices for VMware vSphere™ 4.1”. Here are a list of additional points of interest specifically regarding Dell PowerEdge servers:

• Hardware-Assisted Virtualization: As the VMware best practices state, this technology provides hardware-assisted CPU and MMU virtualization.
  In the Dell PowerEdge BIOS, this is known as “Virtualization Technology” under the “Processor Settings” screen. Depending upon server model, this may be Disabled by default. In order to utilize these technologies, Dell recommends setting this to Enabled.
• Intel® Turbo Boost Technology and Hyper-Threading Technology: These technologies, known as “Turbo Mode” and “Logical Processor” respectively in the Dell BIOS under the “Processor Settings” screen, are recommended by VMware to be Enabled for applicable processors; this is the Dell factory default setting.
• Non-Uniform Memory Access (NUMA): VMware states that in most cases, disabling “Node Interleaving” (which enables NUMA) provides the best performance, as the VMware kernel scheduler is NUMA-aware and optimizes memory accesses to the processor it belongs to. This is the Dell factory default.
• Power Management: VMware states “For the highest performance, potentially at the expense of higher power consumption, set any BIOS power-saving options to high-performance mode.” In the Dell BIOS, this is accomplished by setting “Power Management” to Maximum Performance.
• Integrated Devices: VMware states “Disable from within the BIOS any unneeded devices, such as serial and USB ports.” These devices can be turned off under the “Integrated Devices” screen within the Dell BIOS.
• C1E: VMware recommends disabling the C1E halt state for multi-threaded, I/O latency sensitive workloads. This option is Enabled by default, and may be set to Disabled under the “Processor Settings” screen of the Dell BIOS. (I will keep the default to Enabled as I want to save more power in my data center and be enviornmental friendly)
• Processor Prefetchers: Certain processor architectures may have additional options under the “Processor Settings” screen, such as Hardware Prefetcher, Adjacent Cache Line Prefetch, DCU Streamer Prefetcher, Data Reuse, DRAM Prefetcher, etc. The default settings for these options is Enabled, and in general, Dell does not recommend disabling them, as they typically improve performance. However, for very random, memory-intensive workloads, you can try disabling these settings to evaluate whether that may increase performance of your virtualized workloads.

Finally, in order to take the advantage of ESX 4.1 Power Management feature in vCenter to show up, you need to change the setting in BIOS Power Management to “OS Control”.