Comments (0)

By admin, October 5, 2010 10:47 pm

The following is my own findings tested with IOmeter 2006 (4K, 100% Random, Read and Write tests). I ran the test from a VM and used as much as 10 workers to saturate that single PS6000XV.

There are also two very interesting IOPS threads on VMware Communities, I am going to perform those tomorrow as well.

Unofficial Storage Performance Part 1 & Part 2

The VMTN IOMETER global options and parameters:
=====================================

Worker
Worker 1
Worker type
DISK
Default target settings for worker
Number of outstanding IOs,test connection rate,transactions per connection
64,ENABLED,500
Disk maximum size,starting sector
8000000,0

Run time = 5 min

For testing the disk C is configured and the test file (8000000 sectors) will be created by
first running – you need free space on the disk.

The cache size has direct influence on results. By systems with cache over 2GB the test
file should be increased.
LINK TO IOMETER:
http://sourceforge.net/projects/iometer/

Significant results are: Av. Response time, Av. IOS/sek, Av. MB/s
To mention are: what server (vm or physical), Processor number/type; What storage system, How many disks

Here the config file *.icf, copy it and save it as vmware.icf for IOMETER later. (Do not copy those the top and bottom lines containing ###############BEGIN or END###############)
####################################### BEGIN of *.icf
Version 2004.07.30
‘TEST SETUP ====================================================================
‘Test Description
IO-Test
‘Run Time
‘ hours minutes seconds
0 5 0
‘Ramp Up Time (s)
0
‘Default Disk Workers to Spawn
NUMBER_OF_CPUS
‘Default Network Workers to Spawn
0
‘Record Results
ALL
‘Worker Cycling
‘ start step step type
1 5 LINEAR
‘Disk Cycling
‘ start step step type
1 1 LINEAR
‘Queue Depth Cycling
‘ start end step step type
8 128 2 EXPONENTIAL
‘Test Type
NORMAL
‘END test setup
‘RESULTS DISPLAY ===============================================================
‘Update Frequency,Update Type
4,WHOLE_TEST
‘Bar chart 1 statistic
Total I/Os per Second
‘Bar chart 2 statistic
Total MBs per Second
‘Bar chart 3 statistic
Average I/O Response Time (ms)
‘Bar chart 4 statistic
Maximum I/O Response Time (ms)
‘Bar chart 5 statistic
% CPU Utilization (total)
‘Bar chart 6 statistic
Total Error Count
‘END results display
‘ACCESS SPECIFICATIONS =========================================================
‘Access specification name,default assignment
Max Throughput-100%Read,ALL
’size,% of size,% reads,% random,delay,burst,align,reply
32768,100,100,0,0,1,0,0
‘Access specification name,default assignment
RealLife-60%Rand-65%Read,ALL
’size,% of size,% reads,% random,delay,burst,align,reply
8192,100,65,60,0,1,0,0
‘Access specification name,default assignment
Max Throughput-50%Read,ALL
’size,% of size,% reads,% random,delay,burst,align,reply
32768,100,50,0,0,1,0,0
‘Access specification name,default assignment
Random-8k-70%Read,ALL
’size,% of size,% reads,% random,delay,burst,align,reply
8192,100,70,100,0,1,0,0
‘END access specifications
‘MANAGER LIST ==================================================================
‘Manager ID, manager name
1,PB-W2K3-04
‘Manager network address
193.27.20.145
‘Worker
Worker 1
‘Worker type
DISK
‘Default target settings for worker
‘Number of outstanding IOs,test connection rate,transactions per connection
64,ENABLED,500
‘Disk maximum size,starting sector
8000000,0
‘End default target settings for worker
‘Assigned access specs
‘End assigned access specs
‘Target assignments
‘Target
C:
‘Target type
DISK
‘End target
‘End target assignments
‘End worker
‘End manager
‘END manager list
Version 2004.07.30

####################################### ENDE of *.icf